CZ
EN
M.2 (S80) 3IS2-P
SATA III solution for Server Boot-Up Drive
Základní informace
- SATA III solution for Server Boot-Up Drive
- Cost-effective flash with iSLC
- iSMART disk health monitoring
- Intelligent error recovery system
- High IOPS to enhance boot up timing
- Zero mechanical interference
- iData Guard for abnormal power failure
- DEVSLP supported
Innodisk M.2 (S80) 3IS2-P is designed as the standard M.2 form factor with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. The form factor refers to the M.2(NGFF) specification which established by JEDEC.
Innodisk M.2 (S80) 3IS2-P is designed for server field. It effectively reduces the booting time of operation system and has less power consumption compared to hard disk drive (HDD). The great benefit of M.2 (S80) 3IS2-P is to be configured as a SATA boot device with no requirement on additional driver and without using a drive bay, making it perfect
for server applications.
Specifikace
| Model Name | M.2 (S80) 3IS2-P |
| Interface | SATA III 6.0 Gb/s |
| Flash Type | iSLC |
| Capacity | 32GB~512GB |
| Max. Channels | 4 |
| Sequential R/W (MB/sec, max.) | 560/450 |
| Max. Power Consumption | 1.5W (3.3V x 450mA ) |
| Thermal Sensor | Y |
| H/W Write Protect | Optional |
| ATA Security | Y |
| S.M.A.R.T. | Y |
| Dimension (WxLxH/mm) | 22.0 x 80.0 x 3.5 |
| Vibration | 20G@7~2000Hz |
| Shock | 1500G@0.5ms |
| MTBF | >3 million hours |
| Storage Temperature | -55°C ~ +95°C |
| Operation Temperature | Standard Grade: 0°C ~ +70°C; Industrial Grade: -40°C ~ +85°C |
Ke stažení
NAVRHNEME VÁM ŘEŠENÍ NA KLÍČ
Hledáte technologického partnera? Neváhejte se na nás obrátit.
